how to change a lawnmower pull cord

How to change a lawnmower pull cord

Hey there, fellow lawn enthusiasts! Have you ever found yourself frustrated with a broken pull cord on your beloved lawn mower? Well, fear not, because today we’re going to dive into the world of lawn mower maintenance and show you just how simple it can be to change that pesky pull cord. But hold on a moment! How exactly does a pull cord work? And why does it seem to snap at the most inconvenient times? Don’t worry, we’ve got you covered. In the following sections of this article, we’ll provide you with a step-by-step guide on how to change a lawn mower pull cord, so you can get back to having a pristine and efficiently running mower in no time!

To find out more about how to change a lawn mower pull cord stay around.

Effortlessly Replace Your Lawn Mower’s Pull Cord with These Easy Steps

To change a lawn mower pull cord, follow these steps:

1. Disconnect Spark Plug: Safety should always be a priority when working with any engine. Start by disconnecting the spark plug wire to prevent accidental start-ups.

2. Remove Housing: Locate the screws or bolts that secure the housing covering the pull cord assembly. Use a screwdriver or a wrench to remove them and carefully take off the housing.

3. Access the Cord and Recoil Mechanism: Once the housing is removed, you should be able to see the recoil mechanism and the old pull cord. Take note of how the old cord is attached to the mechanism as a reference for the reinstallation.

4. Remove the Old Cord: Carefully unwind or cut the knot anchoring the old cord to the recoil mechanism. Slowly pull out the old cord from the mechanism and discard it.

5. Prepare the New Cord: Measure and cut a length of new pull cord, ensuring it is of similar thickness and type to the old one. It is recommended to use nylon or polyester cord for durability. Melt the ends of the new cord slightly with a lighter to prevent fraying.

6. Attach the New Cord: Feed one end of the new cord through the opening in the recoil mechanism, and tie a secure knot on the inside of the mechanism. If there was a reference point from the old cord, try to replicate the attachment method. Ensure the cord is tightly secured.

7. Wind the Recoil Mechanism: Gradually wind the recoil mechanism in the same direction the cord pulls when starting the mower. Apply tension to the cord as you wind it to maintain proper tension when recoiling. Be cautious not to let go of the cord abruptly, as it can recoil too forcefully.

8. Thread the Cord: Once the recoil mechanism is wound tightly, thread the free end of the cord through the hole on the outer housing where the pull handle is located. If there is an eyelet or grip attached to the cord, make sure it is securely in place.

9. Reinstall the Housing: Carefully line up the housing with the lawn mower body, ensuring all the holes align properly. Insert and tighten the screws or bolts that secure the housing back in place.

10. Test the New Pull Cord: Reconnect the spark plug wire and give the new pull cord a gentle test by pulling it a few times. Ensure the cord retracts smoothly and that there is proper tension when pulling.

By following these steps, you should be able to successfully change the pull cord on your lawn mower. If you encounter any difficulties or feel uncomfortable performing this task, it’s advisable to seek assistance from a professional or a qualified technician.

How to change a lawn mower pull cord: Faqs.

1. How do I replace a broken pull cord on my lawn mower?

To replace a broken pull cord on your lawn mower, you will first need to remove the starter assembly. Then, unwind the old cord and detach it from the pulley. Next, thread a new cord through the hole in the pulley and tie a knot at the end. Finally, wind the new cord around the pulley and reattach the starter assembly.

2. What tools do I need to change a lawn mower pull cord?

To change a lawn mower pull cord, you will typically need a socket wrench or screwdriver to remove the starter assembly, a pair of pliers to unwind the old cord and attach the new one, and a knot-tying tool or a simple knot-tying technique. Additionally, you may need a replacement pull cord and any necessary hardware or parts.

3. Why won’t my lawn mower pull cord retract?

If your lawn mower pull cord won’t retract, it could be due to a few reasons. One possibility is that the cord is tangled or caught on something within the mower engine. In this case, you will need to open the starter assembly and inspect the cord for any obstructions. Another reason could be a worn-out or damaged starter recoil spring, which may require replacement to restore proper cord retraction.

Final thought about how do i change a lawn mower pull cord?

In conclusion, changing a lawn mower pull cord may seem like a daunting task, but with the right tools and a little patience, it can easily be accomplished. By following the step-by-step instructions provided, you can save yourself time and money by not having to take your mower to a professional for repairs.

Remember to prioritize safety first by disconnecting the spark plug and ensuring the mower is turned off and cool before starting the process. Take your time to carefully remove the old pull cord, inspect it for any damage, and replace it with a new one if necessary.

Additionally, ensure that the recoil assembly is functioning properly and is properly lubricated. This will contribute to the longevity and smooth operation of your lawn mower pull cord.

By maintaining your lawn mower regularly and replacing the pull cord when needed, you can avoid any unexpected issues and keep your mower in top working condition. Happy mowing!

Scroll to Top