How to drain water from pool lines

Are you tired of struggling with excess water in your pool lines? Do you find yourself wondering how to effectively blow out the water and prevent potential damage during the winter months? If so, you have come to the right place! In this article, we will address these questions and provide you with all the necessary information and techniques to successfully blow the water out of your pool lines. So, let’s dive in and discover the most efficient methods to ensure a trouble-free winter season for your pool.

To find out more about how to blow water out of pool lines stay around.

Effective Techniques for Safely Clearing Pool Lines of Water

To blow water out of pool lines, follow these steps:

1. Gather the necessary equipment:
– A pool air blower or a shop vacuum with a reverse function or air compressor
– suitable attachments or fittings for connecting the blower or vacuum to the pool lines
– Safety goggles and gloves

2. Turn off the pool equipment:
– Ensure that the pool pump, heater, and any other pool equipment are turned off.

3. Shut off the water supply:
– Locate and close the valves that supply water to the pool lines. This will prevent any new water from entering the lines while you’re blowing out the water.

4. Attach the blower or vacuum:
– Connect the blower or vacuum hose to the pool lines. If using a shop vacuum, make sure it is set to reverse mode.

5. Open the air release valve:
– Locate the highest pool line or the furthest line from the blower/vacuum and open the air release valve. This will allow air to escape as the water is expelled.

6. Begin blowing the water out:
– Turn on the blower or vacuum and allow it to run until you notice that only air is coming out of the pool lines. This could take several minutes depending on the size of the lines and the pressure of the blower/vacuum.

7. Work systematically:
– Start from the furthest pool line and work your way towards the blower/vacuum, closing each air release valve as you go. This ensures that all water is expelled from the lines.

8. Check pressure gauge (if available):
– If your pool system has a pressure gauge, monitor it during the blowing process. If the pressure rises significantly, it may indicate that there is still water in the lines or a blockage that needs to be cleared.

9. Disconnect the blower or vacuum:
– Once you are confident that all water has been blown out, turn off the blower or vacuum and disconnect it from the pool lines.

10. Complete any additional maintenance:
– Once the pool lines are blown out, you may proceed with any necessary maintenance such as winterizing the pool or conducting repairs.

Remember to exercise caution and follow safety guidelines while performing these steps to avoid any accidents or damages. If you are unsure or uncomfortable with the process, consider seeking assistance from a professional pool technician.

How to blow water out of pool lines: Faqs.

1. How do I remove water from my pool lines?

To remove water from pool lines, you can use a shop vac or an air compressor. Connect the vacuum or compressor to the appropriate line and turn it on, allowing it to suck or blow the water out of the lines.

2. Can I use a leaf blower to blow water out of my pool lines?

No, a leaf blower is not recommended for blowing water out of pool lines. It lacks the necessary power and pressure to effectively remove water from the lines.

3. Are there any specific precautions I should take when blowing water out of pool lines?

Yes, it is important to ensure that all valves leading to the pool are closed before attempting to blow the water out. Additionally, wear protective eyewear and gloves to prevent any potential injury.

4. Can I use a sump pump to remove water from pool lines?

While a sump pump can be used to remove water from pool lines, it may not be as effective as using a dedicated vacuum or air compressor. The sump pump may not have enough power to fully clear the lines.

Final thought about how can i blow water out of pool lines?

In conclusion, blowing water out of pool lines requires careful planning and execution to ensure a successful winterization process. Here are some final thoughts to consider:

1. Safety first: Before attempting to blow water out of pool lines, make sure to turn off all equipment and shut off the pool’s main power supply. Safety goggles and gloves are essential to protect against any unexpected pressure or debris.

2. Proper air compressor: Choose an air compressor with sufficient power and pressure to effectively push out the water from the pool lines. Consider renting or hiring a professional if you don’t own an appropriate air compressor.

3. Use the right attachments: Attach a blowout plug or a fitting to the pool’s return jets or other designated openings to connect the air compressor. This will create a sealed connection, allowing the air to flow directly into the lines and push out the water.

4. Gradual and systematic approach: Start with the furthest return jet from the pump and work towards the closest one. This method ensures all lines are cleared effectively and prevents any leftover water pockets in the connecting pipes.

5. Monitor progress: Keep a close eye on the water being blown out of the lines. Once the water stops, it indicates that the lines are mostly clear. However, it is advisable to repeat the process at least once to be sure.

6. Pool antifreeze: After blowing out the lines, consider adding pool antifreeze to prevent any remaining water from freezing and causing damage. Follow the manufacturer’s instructions for the appropriate amount to use.

7. Documentation: Keep a detailed record of the winterization process, including the steps taken, dates, and any additional chemicals or antifreeze used. This documentation will be helpful when reopening the pool in the spring.

8. Professional assistance: If you are unsure about any step or if your pool has a complex plumbing system, it’s best to consult with a professional pool service company. They can ensure proper winterization and minimize any potential issues during the offseason.

Remember, the process of blowing water out of pool lines is critical for preventing costly damages caused by freezing temperatures. By following these guidelines and considering expert advice when needed, you can protect your pool and equipment, ensuring its longevity and functionality for the next swimming season.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top