how to remove air from pool return lines

How to remove air from pool return lines

Are you struggling to remove air from your pool return lines? Are you tired of dealing with reduced water flow and poor pool circulation? If so, we’ve got you covered! In this article, we will explain everything you need to know about getting air out of pool return lines. Whether you’re a seasoned pool owner or a newbie to pool maintenance, our step-by-step guide will provide you with all the necessary information and tips to tackle this common issue effectively. So, sit back and relax as we dive into the world of pool maintenance and solve this problem together!

To find out more about how to get air out of pool return lines stay around.

To get air out of pool return lines, how do I do it?

To fix the problem of air in the pool return lines, follow these steps:

1. Turn off the pool pump: Before starting any work, make sure the pool pump is turned off to prevent any accidents or injury. This will also prevent any new air from getting trapped in the lines while you work on removing the existing air.

2. Locate the air release valve: Look for the air release valve on the pool return line. It is usually located near the pool equipment, such as the pump or filter. The valve may be a small lever or a screw-type valve.

3. Open the air release valve: If the valve is a small lever, flip it to the open position. If it is a screw-type valve, use a screwdriver to turn it counterclockwise to open it. Opening the valve will allow air to escape from the pool return lines.

4. Begin venting air: Slowly open the air release valve and listen for any hissing sounds indicating the release of air. It may take a few seconds or minutes for air to start coming out. You can also use a pressure gauge to monitor the air pressure. As the air is released, you will see a drop in pressure on the gauge.

5. Wait for the water flow: As the air is being released, you will notice a decrease in air and an increase in water flow through the pool return lines. Once you see a consistent flow of water without any air bubbles or sputtering, it indicates that most of the air has been removed.

6. Close the air release valve: Once the water flow is steady, close the air release valve. If it is a lever, return it to its original closed position. If it is a screw-type valve, use a screwdriver to tighten it clockwise until it is closed fully.

7. Turn on the pool pump: After closing the air release valve, you can now turn the pool pump back on. Check for proper water flow and ensure there are no air bubbles or sputtering in the return jets. If you notice any air still trapped in the lines, repeat the process of venting air by opening the air release valve.

Remember, it is essential to remove air from pool return lines as it can cause inefficiency in the filtration system and decrease the overall performance of the pool equipment. Regularly checking for air build-up and venting it will help maintain a properly functioning pool system.

How to get air out of pool return lines: Faqs.

1. How do I remove air from my pool return lines?

To remove air from your pool return lines, you can try the following steps:
– Check the water level: Make sure the water level in your pool is at least halfway up the opening of the pool skimmer.
– Check the pump and filter system: Ensure that the pump and filter system are operating correctly and there are no clogs or obstructions.
– Bleed the air from the lines: Open the air relief valve on the pool filter and let any trapped air escape until water starts to come out. Repeat this process for all the return lines until all the air is removed.
– Restart the system: Once you have removed the air from the lines, restart the pool pump and filter system to circulate the water properly.

2. What causes air in pool return lines?

There can be multiple reasons for air to be present in your pool return lines:
– Low water level: If the water level in your pool is too low, it can cause air to be drawn into the return lines.
– Leaks or cracks: Leaks or cracks in the pool plumbing or equipment can allow air to enter the return lines.
– Clogs or obstructions: Blockages in the pool plumbing system can cause air to get trapped and accumulate in the return lines.
– Pump issues: Problems with the pool pump, such as a faulty impeller or worn-out gaskets, can result in air being sucked into the return lines.

3. How can I prevent air from getting into my pool return lines?

To prevent air from entering your pool return lines, you can take the following precautions:
– Maintain proper water level: Ensure that the water level in your pool is always at the appropriate level, preferably halfway up the pool skimmer opening.
– Regularly inspect the plumbing: Check the pool plumbing for any leaks, cracks, or loose fittings. Repair any issues promptly to prevent air from entering the return lines.
– Clean the skimmer and pump basket: Regularly clean the skimmer basket and pump basket to prevent debris from clogging the pool plumbing system and causing air to be trapped.
– Perform regular pool maintenance: Regularly maintain your pool and its equipment, including the pump and filter system, to ensure proper functioning and minimize the risk of air getting into the return lines.

Final thought about how do i get air out of pool return lines?

In conclusion, removing air from pool return lines is a crucial step to maintaining optimal pool functionality and performance. By following the steps outlined above:
1. Ensure the pool pump is turned off before beginning the process.
2. Determine the air entry point and fix any leaks or cracks in the equipment.
3. Use a garden hose or a pool vacuum attachment to flush out the air manually.
4. Backwash or clean the filter to remove any trapped air or debris.
5. Monitor the water pressure and air bubbles during the process to ensure proper flow.
6. Repeat the process if necessary until all air is removed.

Remember, maintaining proper water circulation and eliminating air pockets will not only improve the efficiency of your pool system but also extend the lifespan of your equipment. Regularly checking for air in the pool return lines and addressing any issues promptly will help you enjoy a clean and well-functioning pool all year round.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top